POÄNG Armchair, birch veneer/Knisa light beige
+2½″ margin
Will fit in an ?
No, it won't fit.
It will not fit in this setup: BILLY Bookcase, white, 31 1/2x11x79 1/2 " is too large for an Alfa Romeo Giulietta Turismo 2010 with seats up.
Fit Details
With seats up, This package will not fit in this setup. The blocker is opening width, and you're short by 35⅛″ even with diagonal loading. We're about 95% confident in this estimate.
BILLY Bookcase, white, 31 1/2x11x79 1/2 "
Box: 81¼″ × 11¾″ × 5″ · 88 lb 1 oz
Based on IKEA US (United States).
Package dimensions last checked and updated on Aug 06, 2026
Also on IKEA:United Kingdom
Package
Status
Limiting factor
Best orientation
Package #1
81¼″ × 11¾″ × 5″
Status:35⅛″ short
Limited by
Limiting factor:Opening width
Best orientation:Diagonal
Vehicle limits
Opening width / height
31⅞″ / 29⅞″
Cargo width / height
40⅛″ / 38¼″
Cargo length seats up / down
30⅜″ / 57⅞″
Loading sill height
30¾″
Alfa Romeo Giulietta Turismo 2010
Measurements last checked and updated on Sep 01, 2026
Helpful tips
Use these loading tips to improve your chances of fitting BILLY Bookcase, white, 31 1/2x11x79 1/2 " in Alfa Romeo Giulietta Turismo 2010.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Load diagonally first
Load diagonally first, then straighten once inside.
Try fitting alternatives
Check the Similar items that fit section for safer alternatives.
Alternatives that fit in Alfa Romeo Giulietta Turismo 2010
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Alfa Romeo Giulietta Turismo 2010 boot
The Giulietta Turismo gives you a compact hatch boot with a small mouth. The opening measures 31⅞″ wide by 29⅞″ tall, and the floor runs 30⅜″ deep with the rear seats up, stretching to 57⅞″ once you fold them. Width between the arches is 40⅛″, wider than the opening itself. Plan around that mouth: anything wide and rigid has to clear it first. Cases, boxes and shopping loads travel fine, long flat-pack cartons do not. The sill sits 30¾″ up with an 8¼″ drop, so lower heavy items in rather than dropping them.
About the BILLY Bookcase, white, 31 1/2x11x79 1/2 " package
The BILLY ships as one long, flat carton, 81¼″ × 11¾″ × 5″, and it is heavier than it looks at 88 lb 1 oz. The shape is the awkward part: long and only 5″ thick, a rigid panel box that will not bend or fold around a wheel arch. That length rules out most boots with the seats up. You want an estate, a hatchback with the rear seats folded, or an SUV that gives a flat run past the front seats. Two people make this easy. Carry it on edge, slide it in low, and rest the leading edge on something soft.
Frequently asked questions
Find quick answers about fit for BILLY Bookcase, white, 31 1/2x11x79 1/2 " in Alfa Romeo Giulietta Turismo 2010, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will BILLY Bookcase, white, 31 1/2x11x79 1/2 " fit in Alfa Romeo Giulietta Turismo 2010?
No. With seats up, it is short by 35⅛″ at Opening width, even with diagonal loading.
What is the tightest part?
The limiting factor is Opening width, with -35⅛″ margin in seats up.
What should I do instead?
Use the Helpful tips & alternatives section to choose a smaller item, different orientation, or split-load plan.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with -35⅛″ margin.
How tight is this fit?
This result is in the clear no-fit band (-35⅛″ at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-35⅛″). Seats down: No (-20½″). Default selection follows YES > MAYBE > NO.
Why does it not fit?
The blocker is Opening width. The worst margin is -35⅛″ in seats up, so clearance is below the required buffer.
Can I load it diagonally?
Yes, diagonal is the best orientation for this check, with -35⅛″ around the limiting point.
Which loading orientation works best?
Diagonal is the best orientation for this result in seats up.
How confident is this result?
Confidence is 95 out of 100 based on available dimensions and margin tightness.