NORDEN Gateleg table, birch, 26/89/152x80 cm
+21 cm margin
WillKRAGSTA Coffee table, black, 90 cmfit in aFord Puma 2022?
Maybe, it's a tight fit.
It might fit, but it's tight: KRAGSTA Coffee table, black, 90 cm is borderline in a straight orientation in a Ford Puma 2022 with seats down.
Fit Details
With seats down, It's close. This package is a borderline fit at opening width (+2 cm), best loaded straight. See the Helpful tips section below for practical loading suggestions. We're about 75% confident in this estimate.
KRAGSTA Coffee table, black, 90 cm
Package dimensions last checked and updated on Mar 01, 2026
Package
Status
Limiting factor
Best orientation
Package #1
94 x 92 x 7 cm
Status:+2 cm tight
Limited by
Limiting factor:Opening width
Best orientation:Straight
Vehicle limits
Opening width / height
97 cm / 77 cm
Cargo width / height
100 cm / 95 cm
Cargo length seats up / down
72 cm / 147 cm
Loading sill height
78 cm
Ford Puma 2022
Measurements last checked and updated on Mar 25, 2026
Helpful tips
Use these loading tips to improve your chances of fitting KRAGSTA Coffee table, black, 90 cm in Ford Puma 2022.
Optimize opening width
Keep the narrow edge leading while entering the opening.
Keep a straight loading path
Keep the package straight and level while loading.
Clear real-world obstacles
Clear the trunk before loading. Existing cargo, trunk cover, and wheel-arch bumps can reduce usable space.
Alternatives that fit in Ford Puma 2022
Ranked by fit margin and package-dimension similarity. This improves as we index more items.
About the Ford Puma 2022 boot
The Puma 2022 has a short load floor with the seats up at 72 cm, but it stretches to 147 cm once the bench is folded, a 75 cm gain. The opening sits at 97 cm wide by 77 cm tall, and the floor stays a useful 100 cm wide. The sill is high at 78 cm with an 18 cm drop to the load floor, so heavy boxes need a lift over the lip. This boot suits shopping, gym kit, and mid-size flat packs once folded. Anything close to a metre upright will not clear with the seats up: plan to drop the bench.
About the KRAGSTA Coffee table, black, 90 cm package
The KRAGSTA coffee table arrives as a single flat slab: 94 cm long, 92 cm wide, 7 cm thick, and 15.9 kg. The awkward thing is the near-square footprint. It is too wide to slide in on edge through most hatchback openings, and too rigid to flex around a wheel arch. Most estates and SUVs handle it cleanly with the seats up. Smaller hatchbacks need the rear bench folded and a careful slide. At the boot lip, lay it flat and rotate the corners diagonally past the trim before pushing it home.
On pickup day
This is borderline in your Puma and only works with the rear bench folded. Seats up, the box fails by 18 cm on the opening height and the 72 cm boot floor cannot take the 94 cm length anyway. Drop the bench, your floor stretches to 147 cm, and the 92 cm width clears the 97 cm aperture by a thin 2 cm margin. Slide it in flat and slow. The parcel shelf has to come out, and 2 cm leaves no room for trim or a misaligned latch, so verify with tape on the day. Last checked April 2026.
Frequently asked questions
Find quick answers about fit for KRAGSTA Coffee table, black, 90 cm in Ford Puma 2022, including seats up vs seats down, limiting factor, best orientation, and package-by-package margins.
Will KRAGSTA Coffee table, black, 90 cm fit in Ford Puma 2022?
Maybe. With seats down, this is a borderline fit at Opening width (+2 cm). Best orientation: straight.
What is the tightest part?
The limiting factor is Opening width, with +2 cm margin in seats down.
Do I need to fold the seats?
Results differ by configuration. Seats up is No and seats down is Maybe.
What could change the result in real life?
Cargo liners, wheel-arch bumps, the trunk cover, and items already in the trunk can reduce usable space. Measure the tightest point if the fit is close.
How tight is this fit?
This result is in the borderline band (+2 cm at Opening width).
Does it fit with seats up or seats down?
Seats up: No (-18 cm). Seats down: Maybe (+2 cm). Default selection follows YES > MAYBE > NO.
What can I try to make it work?
Use straight loading and focus on opening width. Keep the narrow edge leading while entering the opening. Keep the package straight and level while loading.
Is the trunk opening the issue?
Yes. The tightest constraint is at the opening (Opening width) with +2 cm margin.
Which loading orientation works best?
Straight is the best orientation for this result in seats down.
How confident is this result?
Confidence is 75 out of 100 based on available dimensions and margin tightness.